triboworld

CEMENT INDUSTRY

Open Gear Drives (rotating Mills a and Kilns )

COBERTONE-1  Verkol cobert PRIMING GREASE: Adhessive mineral – lithium complex – grafite based grease for brush application. Specially recommended for new or fitted gears before start up. Excellent adhessiveness, anti.-corrosive protection and load carrying capabilities
MOLYWHITE SUPER PRIMING GREASE: Polymeric, clear coloured, high content of low friction coefficient solids priming compound. Stiff and adhessive. Unbeatable anti-corrosive properties also in high vibration conditions. Special for difficult running-in tasks. Its clear color is specially useful to visualize the evolution of the process against black running-in greases. Helps to lower temperatures in new or repaired high roughness or damaged gearings.
VERKOL ALC- 00 R VERKOL ALC- 00 R RUNNING-IN GREASE: Adhessive, sprayable, mineral + aluminium complex + graphite based grease to offer excellent temperature balance and optimum solid lubricant dispersion during running-in. Its particular solid lubricants size combination and special selected running-in additives promote a progressive and balanced load carrying area of flank teeth to improve the conditions to suit the gears for a 100% load service stage.
VERKOL ALC- 00 REP REPAIR GREASE: Special mineral + aluminium complex + graphite + abrassive solids special grease. Designed to apply on damaged or deformed gears, with unbalanced contact areas or to smooth high superficial roughness teeth flanks. It is also recommended to make possible a running-in in short periods of time. To be applied with manual spraying devices only by our specialized technicians.
VERKOL ALC-00 HV VERKOL ALC-00 HV SERVICE GREASE: Sprayable high adhessive grease, based on semi-synthetic high viscosity oil, aluminium complex thickener and special graphite. Its high viscosity base oil, graphite and a selected combination of extreme pressure and antiwear additives guarantees a high load carrying capability and additional service-stage settlement functions, even under very high load and vibration situations. Easily sprayable from -10 ºC. Excellent formulation to avoid overload pitting.
VERKOL OC-20 SERVICE LUBRICANT: semi-synthetic, extra high viscosity and transparent (solid free) lubricant compound. Latest open gear lubrication technology. Sprayable from 5ºC. Tenacious viscoelastic structure to resist extreme loads and vibrations even at high temperatures. Spacially designed fo all kind of rotating mills and kilns.
VERKOL OC-40 SERVICE LUBRICANT: same type of compound like VERKOL OC-20, but even more viscous. Sprayable from 10 ºC. Specially recommended for ball or SAG rotating mills in the mining industry, with huge and high production capacity. The lubricant film keeps strengh and stable until 140 ºC.

BEVEL, HELICAL, PLANETARY AND WORM GEARBOXES. FLOODED BEARINGS, VERTICAL MILLS ROLLERS, ROOTS AND BLADES BLOWERS, HYDROSTATIC CIRCUITS

COMPOUND E SERIES  Verkol COMPOUND E SERIES CLP mineral gear oils specially for gear lubrication under normal operation temperatures. FZG load stage >12. High filterability, seals and paints compatibility. Able to be applied in all type of gearboxes in cement industry.
VERKOL GT-7 SERIES CLP semi-synthetic gear oils specially for extra loaded gearboxes. FZG load stage 14. Its load carrying capabilities is far higher than conventional CLP oils. Highly adhessive and therefore have an excellent corrosion protection. Due to this these oils are highly recommended for outer gearboxes subjected to temperature variations and water condensation.
COMPOUND MP SERIES CLP mineral gear oils specially for gear lubrication under normal operation temperatures. FZG load stage >12. Specially additivated against micropitting, approved by FLENDER GmbH. High filterability, seals and paints compatibility. Able to be applied in all type of gearboxes in cement industry.
CORVUS EP SERIES Verkol CORVUS EP SERIES Special CLP SHC poly-alpha- olefin based gear oils for normal to high applicationa temperatures.. High viscosity index. FZG load stage >12. Specially for bevel, helical and planetary gearboxes, as well as high temperature fans, blowers and high load - high temperature machinery. Very high performance. Energy savings.
CORVUS MP SERIES Special CLP SHC poly-alpha- olefin based gear oils for normal to high applicationa temperatures.. High viscosity index. FZG load stage >12. Specially additivated against micropitting, approved by FLENDER GmbH. Specially for bevel, helical and planetary gearboxes, as well as high temperature fans, blowers and high load - high temperature machinery. Very high performance. Energy savings.
PATELA SERIES Verkol PATELA SERIES Special CLP PAG polyglicol oils specially for gears and bearings subjected to extreme temperatures and high friction rates. Very high viscosity index and cooling potential. Very low friction coefficient. No foaming. Long term lubricant for bearings in slewing rings rollers in cement kilns and for centralized rollers lubrication in verical mills.
VERKOL WG Special fluid grease for worm gearboxes in transportation belts, bucket elevators and crane bridges. Reduces signifficantly leak. Noise damping. Covers a wide range of viscosities.

HYDRAULIC SYSTEMS

VESTA HLP-D SERIES Verkol VESTA HLP-D SERIES Hydraulic oils specially additivated with detergent-dispersant agents to use highly contaminated systems or to fight against varnish and slurry build up.
VESTA HLP SERIES HLP type mineral oils acc. to DIN 51.524 Part II, ashless. Viscosities from ISO – VG 15 to 150 approved by MANNESMANN REXROTH.

HIGH LOADED AND LOW SPEED BEARINGS, BUMPERS AND EDGE JOINTS IN VERTICAL MILLS

ATLANTA ATLANTA-1 Verkol ATLANTA ATLANTA-1 Semi-synthetic, lithium complex + MoS2 special greases. Ultra high viscosity high oil. Weld load = 5.000 N. Totally resistant to water. Approved by LIEBHERR. Specially recommended for bumper bearings, edge joints and every kind of slow motion bearings with high load and vibrations

CENTRALIZED LUBRICATION FOR COOLERS

320-I  Verkol 320-I Lithium complex – mineral high viscosity grease. Very good pumpability and minimal ash and carbon build up. Appliable from -20 to 140 ºC. Water resistant. Reduces drastically the grease consumption in coolers.

GREASE LUBRICATED FANS AND EXHAUSTORS

CORALIA 2 Verkol CORALIA 2 Synthetic – lithium complex EP grease. Special for high temperature and high speed bearings. Prevents wear caused by misalignement. Long term safe operation.
FOMBLIN CR-862 Special synthetic fluorinated grease (PFPE + PTFE). Extraordinary thermal – chemical stability, high load carrying and low starting torque. Non carbonizing and high speed factor.

SLEW RING COMPONENTS, SCROLL CHAINS

ATLANTA -AG  Verkol ATLANTA -AG Soft paste containing micronized copper. Anti seize agent for bolts and threads. Sliding agent for all the micro- moving parts between the slewing rings and rotating kiln shell. High antifriction power until 1100ºC. To be applied manually or by special spraying systems. Contains a special solid lubricants combination to minimize friction at high temperatures. Minimum residue build up, highly penetrating, dry lubrication at high temperatures.

ELECTRIC MOTORS

ASTURUS SERIES Verkol ASTURUS SERIES High performance lithium greases with supreme aeging and water resistance. Special for all kind of electric motors. Available in NLGI consistency grades 2 and 3.
VITALIA BF Mineral – lithium complex special antiwear grease for electric motors working at severe load and temperature conditions. Specially advantageous to achieve optimal sealing and larger relubrication intervals, even in vertical axis motors. Totally insoluble in water.

AIR SCREW COMPRESSORS

NAVAPAR SERIES Verkol NAVAPAR SERIES Rotary and alternative compressor mineral fluids, available in all viscosity grades. High antioxidative properties. Complies with ISO 6743 – L – DAB and DIN 51.506 / VDL standards
NAVASYNT SERIES Superior performance rotary compressor synthetic oils. Performance 6 times higher than mineral oils. Energy savings and total absence of varnish and slurry build up. Complies with ISO 6743 – L – DAB and DIN 51.506 / VDL standards.

MULTIPURPOSE EXTREME PRESSURE GREASING

EPX SERIES Verkol EPX SERIES Lithium extreme pressure greases for general lubrication of all kind of medium loaded bearings and in presence of water. Available in all NLGI consistency grades (00, 0, 1, 2, 3). Categorized as KP..K-20 greases according to DIN 51.502 standard.

CRUSHERS AND VIBRATING SCREENS BEARINGS

VERKOPLEX XP-2VERKOPLEX XP-2 Mineral – lithium complex – EP grease. Designed for high loaded bearings with speed factors up to 300.000. Totally water resistant. Applyable from -20 to 140 ºC.
TERMOPLEX 220 EP Mineral – lithium complex – EP grease. Special foir bearings under speed factors up to 300.000 and even higher load, vibrations and temperature demands. Higher durability and thermal stability up to 140 ºC.
VITALIA BF VITALIA BF Mineral – lithium complex antiwear grease. Special for bearings under speed factors up to 450.000. High thermal stability and longer relubrication intervals up 160 ºC.
CORALIA-2 Synthetic – lithium complex – EP grease. Special for centrifugal high speed mills (speed factor up to 500.000) and temperatures up to 180ºC.

CRUDE AND CEMENT STORAGE CHAINS

GUÍAS LTF 220 GUÍAS LTF 220 Special adhessive and antiwear oil designed for the lubrication of slideways and chains, even large chains and in several positions. Doesn´t drip off and offers a high antiwear and anticorrosion properties at operational temperatures up to 80º. Good water displacing properties. Contributes to minimize the dust enter into the chain bushings. Appliable via automatic systems.

©2015. TriboWorld LLP.All rights reserved Powered by DzainLab