COMPOUND E ISO VG 68/100/150/220/320/460/680/1000/2200
Lubricating oils for industrial gearboxes, bearings, pump bearings and circulation systems requiring oils with extraordinary anti-wear power and extreme-pressure qualities. They have excellent water demulsibility properties (can be removed by purging), anti-corrosion, anti-rust and and- anti foam qualities.They meet the requirements of U.S. Steel-224 and DIN 51517 Part 3-CLp.
Compound MP ISO VG 150/220 /320/460
Oils for industrial gearboxes, rolling contact bearings and pump bearings and circulation systems requiring oils with extraordinary anti-wear power and extreme pressure qualities. Carefully and specially additivated to prevent micropitting (or gray-staining) phenomenon, passing brilliantly FLENDER'S FVA 54-IV test.
They meet the requirements - of DIN 51517 Part 3-CLP standard and U.S. Steel-224, AGMA 9005 E-02, David Brown S51 .53.101 and Cincinnati MiIacrom-P specifications. Approvals: FLENDER GmbH.
COMPOUND FG ISO VG 100/150/220/320/460
High--performance nun-toxic lubricating oils with excellent anti-wear and extreme pressure properties of industrial Gearboxes, rolling contact bearings, pump bearings and circulation systems. Especially designed for gearboxes with spur, helical or worm gears in the adequate viscosity in the food industry working at normal temperatures, and where an incidental contact between the food or its packing and the lubricant may occur.
They satisfy the requirements of DIN 51517 Part 3-CLP standard.Registered as H-1 by NSF: Registration nos 145644, 145645, 145647, 145647or 145848 (depending on viscosity grades).
VERKOL GT-7 ISO VG 150/220/320/460/680
Oils for industrial gears requiring extraordinary extreme pressure properties. Formulated with highly refined mineral oils and the latest additive, they yield excellent results especially in gearboxes with inverted directions.They possess excellent water separation properties and prevent foarming.
They satisfy widely the quality levels of the following specifications: U.S. Steel-224, DIN 51517 Part 3-CLP AGMA9005 E-02, David- Brown S51.53.101 and Cincinnati Milacron-P.
CORVUS EP ISO VG 150/220/320/460
Synthetic fluids for gears with a high natural viscosity index, an excellent friction coefficient, a low pour point and low volatility CORVUS EP synthetic fluids are perfectly miscible with mineral oils, whose duration they triple. Especially recommended to increase lubrication times and to shorten maintenance times.
They meet the requirements of DIN 51517 Part 3-CLP-HC standard.
CORVUS FG ISO VG 220/320/460
High-performance PA0 type synthetic fluids with excellent extreme-pressure, anti-wear and fit ague prevention Properties. Especially designed for gearbox with spur, helical or warm gears in the adequate viscosity in the food industry - working at medium and high temperature, and where an incidental contact between the food or its packing and the lubricant may occur, They satisfy the requirements of DIN 51517 Part 3-CLP-HCs standard.
Registered as H-1 by NSF nos. 128124, 128125 or 128126 (depending on viscosity grades).
PATELA ISO VG 100/150/220/320/460/680/1000
Synthetic fluids suitable for long-life lubrication of gears with a high natural viscosity index, an extraordinary friction coefficient, a low pour point and very low volatility Especially- suited for gearbox with high temperature and load requirements where a low friction coefficient enhances machine performances and reduces energy consumption. PATELA synthetic fluids are not miscible with mineral oils hence a major cleanup of the system needs to be done before filling it up. These products are compatible with most components used in the manufacture Of joints and seals. They meet the requirements of DIN 51517 Part 3-CLP-PG standard.
VERKOL OC 20 / 40
Especial fluids for service lubrication of open gear drives (crown-pinon type drives), plain bearings and chains in sugar cane alcohol and sugar cane alcohol factories. Also recommended for gear drives in mills and Kilns in the Cement and mining industry requiring very high viscosity lubricants.
Semi-synthetic, transparent, &my, thread lubricating gel. Strongly adherent and highly resistant to oxidation. Very resistant to mechanical work and with good anti-wear and extreme pressure properties. This product is especially formulated for the lubrication of gears, including worm gears located in places with difficult access and/or where there could be leakage or noise problems. Ideal for bridge cranes.
BIOCOMPOUND ISO VG 220/320
Biodegradable synthetic lubricating fluids for industrial gearboxes, worm gear, crown-pinion gears, flexible couplings and bearings operating at moderate speeds, circulation systems, etc. requiring medium viscosity fluids with extraordinary anti-wear and extreme -pressure properties. BIOCOMPOUND synthetic fluids are non-toxic and have a biodegradability rate above 65% according to OECD-30 1 B tests.