triboworld

STEEL INDUSTRY

Steel Melting shop. Mould lubricating Oil

VERKOCAST - 85 Totally synthetic fluid for the lubrication of moulds during the continuous steel casting process. Specially developed as mould release agent for high-speed continuous casting machines. The advantages of this lubricant are: * Excellent lubricating properties which allow high casting speed, increasing productivity. * Low fuming supports operator acceptance. * Superior adhesion and wetting properties providing homogeneous lubricanting film which improves surface quality. * High oxidation stability and high viscosity to ensure process reliability. * Improved mould cleanness. No sticky residues. * Low consumption rate per ton of cast steel.
LACERTA CZ - 30 Fluid developed for use as mould stripper during the continuous steel casting process. It is based on biodegradable fluids and mineral oils and it is specially additivated to avoid the direct contact between liquid metal and mould, forming a reducing atmosphere which resists the superficial oxidation of slab, bloom or steel billets producing a lubricant effect and avoiding the seizure (binding). This fluid slows down the superficial solidification of the steel, conferring a homogenous heat transfer, avoiding the formation of superficial oxide inclusions and pin holes which would produce serious problems in casting products. It also reduces the formation of smoke to a minimum.
LACERTA - BG Fluid developed for use as mould stripper during the continuous steel casting process. It is based on ashless biodegradable fluids and it is specially additivated to avoid the direct contact between liquid metal and mould, forming a reducing atmosphere which resists the superficial oxidation of slab, bloom or steel billets producing a lubricant effect and avoiding the seizure (binding). This fluid slows down the superficial solidification of the steel, conferring a homogenous heat transfer, avoiding the formation of superficial oxide inclusions and pin holes which would produce serious problems in casting products. It also reduces the formation of smoke to a minimum.

Steel Melting shop. Continuous caster Bearing.

ALHENA - 2 EP Synthetic grease thickened with lithium complex soap. Stable at high temperature, resistant to thermal oxidation. Designed for lubricating large bearings operating at slow or medium speeds and high vibratory loads. Most recommended for water-cooled bearings or bearings operating under saturated steam. Steel industry: CONTINUOUS CASTER BEARINGS. Paper industry: HIGH TEMPERATURE BEARINGS (dry end rolls, Doctors, etc.). Meets the requirements of METSO and BELOIT. Wind turbines: MAIN BEARING and AZIMUTH BEARING. Classification according to DIN 51502: KPEHC 2/3P-30.
ALHENA - 1 EP Synthetic grease thickened with lithium complex soap. Stable at high temperature, resistant to thermal oxidation. Designed for lubricating large bearings operating at slow or medium speeds and high vibratory loads. Most recommended for water-cooled bearings or bearings operating under saturated steam. Suitable for centralized lubrication systems. Steel industry: CONTINUOUS CASTER BEARINGS, REHEATING OVEN BEARINGS. Paper industry: HIGH TEMPERATURE BEARINGS (dry end rolls, Doctors, etc.). Meets the requirements of METSO and BELOIT. Wind turbines: MAIN BEARING and AZIMUTH BEARING. Classification according to DIN 51502: KPEHC 1/2P-30.
VERKOL THT - 2 Special grease for all types of components subjected to very high temperatures, such as oven hinges, drying room conveyor chains, tunnel kiln cars, continuous pouring bearing elements and, in general, all kinds of rotating or sliding machinery operating under very fatiguing working temperatures, with water and/or steam, being completely insoluble even in boiling water. It has extremely good mechanical stability with respect to crushing actions, vibrations and shocks, protective qualities against rust and corrosion and it is exceptionally resistant to oxidation at high temperatures. Its ash content is very low. Classification according to DIN 51502: K 2N-10.
VERKOL 320 I Lithium complex grease suitable for steel industry and heavy industry in general. Multipurpose grease for temperature applications from -20 to 150°C with peaks up to 200ºC. Classification according to DIN 51502: K 2/1N-20.
VERKOL - CC Lithium grease with EP additives specifically formulated for applying in continuous casting machines with efficient and effective refrigeration (maximum temperature in the bearings of 120ºC), rolling trains and, in general, all types of bearings and bushes that support heavy loads at low speeds. Classification according to DIN 51502: KP 2K-20.

Reheating Oven Bearings

ALHENA - 1 EP Synthetic grease thickened with lithium complex soap. Stable at high temperature, resistant to thermal oxidation. Designed for lubricating large bearings operating at slow or medium speeds and high vibratory loads. Most recommended for water-cooled bearings or bearings operating under saturated steam. Suitable for centralized lubrication systems. Steel industry: CONTINUOUS CASTER BEARINGS, REHEATING OVEN BEARINGS. Paper industry: HIGH TEMPERATURE BEARINGS (dry end rolls, Doctors, etc.). Meets the requirements of METSO and BELOIT. Wind turbines: MAIN BEARING and AZIMUTH BEARING. Classification according to DIN 51502: KPEHC 1/2P-30.
VERKOMAX SG - 2 Calcium sulfonate complex grease with extraordinary anti-corrosion and extreme-pressure properties. Most suitable for lubricating rolling mill bearings in the steel industry. Also ideal for the paper industry. It satisfies the test FAG FE8 DIN 51819-2/B/7,5/80/120, mw50 < 10 mg. Range of temperatures from -15 to +150ºC, with peaks up to 180ºC. Classification according to DIN 51502: KP 2N-10.
VERKOPLEX XP - 2 Lithium complex grease recommended for use in rolling contact bearings, plain bearings and, in general, in mechanisms working under heavy load and high temperature conditions. Classification according to DIN 51502: KP 2N-20.

Section Mill Rreduction Gear Boxes

COMPOUND E-3 / ISO-220 Lubricating oil for industrial gearboxes, rolling contact bearings, pump bearings and circulating systems, requiring fluids with extraordinary anti-wear power and extreme pressure qualities. It has excellent water demulsibility properties (can be removed by purging), anti-corrosion, anti-rust and anti-foam qualities. Paper industry: GEARS (rolls drive, pulpers, etc. by splash lubrication or centralized systems). Meets the requirements of U.S. Steel-224 and DIN 51517 Part 3-CLP-220.
COMPOUND E-4 / ISO-320 Lubricating oil for industrial gearboxes, rolling contact bearings, pump bearings and circulating systems, requiring fluids with extraordinary anti-wear power and extreme pressure qualities. It has excellent water demulsibility properties (can be removed by purging), anti-corrosion, anti-rust and anti-foam qualities. Paper industry: GEARS (rolls drive, pulpers, etc. by splash lubrication or centralized systems). Meets the requirements of METSO DRIVERS and also of U.S. Steel-224 and DIN 51517 Part 3-CLP-320.
VERKOL GT-7 / ISO-220 Oil for industrial gears which require an extraordinary extreme pressure power. Formulated with highly refined paraffinic mineral oil and the most modern additives, obtains excellent results in industrial gears, specially in gearboxes with inverted direction. It possesses excellent water separation and anti-foam properties. Meets the requirements of DIN 51517 Part 3-CLP-220 standard and U.S. Steel-224 and AGMA 9005-E02 specifications.
VERKOL GT-7 / ISO-320 Oil for industrial gears which require an extraordinary extreme pressure power. Formulated with highly refined paraffinic mineral oil and the most modern additives, obtains excellent results in industrial gears, specially in gearboxes with inverted direction. It possesses excellent water separation and anti-foam properties. Meets the requirements of DIN 51517 Part 3-CLP-320 standard and U.S. Steel-224 and AGMA 9005-E02 specifications.

Section Mill Rolling Bearings

VERKOMAX SG - 2 Calcium sulfonate complex grease with extraordinary anti-corrosion and extreme-pressure properties. Most suitable for lubricating rolling mill bearings in the steel industry. Also ideal for the paper industry. It satisfies the test FAG FE8 DIN 51819-2/B/7,5/80/120, mw50 < 10 mg. Range of temperatures from -15 to +150ºC, with peaks up to 180ºC. Classification according to DIN 51502: KP 2N-10.
VERKOMAX SG - 1 Calcium sulfonate complex grease with extraordinary anti-corrosion and extreme-pressure properties. Most suitable for lubricating rolling mill bearings in the steel industry. Also ideal for the paper industry. Suitable for centralized lubrication systems. Classification according to DIN 51502: KP 1N-10.
VERKOMAX EP - 12 Calcium sulfonate complex grease, very suitable for the lubrication of rolling mills bearings in the steel industry. Suitable for centralized lubrication systems. Classification according to DIN 51502: KP 1/2N-20.
VERKOMAX EP - 2 Calcium sulfonate complex grease, very suitable for the lubrication of rolling mills bearings in the steel industry. Classification according to DIN 51502: KP 2N-20.
VERKOPLEX XP - 2 Lithium complex grease recommended for use in rolling contact bearings, plain bearings and, in general, in mechanisms working under heavy load and high temperature conditions. Classification according to DIN 51502: KP 2N-20.
VERKOPLEX XP - 12 Lithium complex grease for all types of mechanisms and bearings working under high temperatures. Recommended for: steel industry, mining, rolling industry and construction machinery. Suitable for centralized lubrication systems. Classification according to DIN 51502: KP 1/2N-20.
VERKOPLEX ST - 1 Lithium complex grease for mechanisms and bearings operating under high temperatures and loads. Most suitable for centralized lubrication systems in the steel industry. Classification according to DIN 51502: KP 1N-10.
VERKOPLEX EP - 2 Lithium complex grease specially developed for rolling contact bearings and plain bearings subjected to high temperatures and high pressures. Very suitable for the steel industry. Classification according to DIN 51502: KP 2N-10.
KIRUNA - 1 EP Lithium grease with special EP additivation. Recommended for rolling contact and plain bearings, and in general, mechanisms that work under high loads a shocks, such as in steel industry, rolling mills, mining, construction and paper machine industries. Classification according to DIN 51502: KPF 1K-20.
KIRUNA - 1 EP Lithium grease with special EP additivation. Recommended for rolling contact and plain bearings, and in general, mechanisms that work under high loads a shocks, such as in steel industry, rolling mills, mining, construction and paper machine industries. Classification according to DIN 51502: KPF 1K-20.
AIRLUBE - 220 Combination of highly refined paraffinic mineral oil with the most modern additives. Its great adherence guarantees the formation of a lubricant film within the rolling elements. Specially formulated for use in air/oil systems of finish roll guideways, as well as for the lubrication of small bearings rotating at medium and high speeds, where medium viscosity fluids with extraordinary anti-wear power and extreme pressure are needed. Meets the requirements of DIN 51517 Part 3-CLP specification.
AIRLUBE Combination of highly refined paraffinic mineral oil with the most modern additives. Its great adherence guarantees the formation of a lubricant film within the rolling elements. Specially formulated for use in air/oil systems of rolling mills and continuous castings, mainly for the lubrication of bearings rotating at medium and low speeds, where high viscosity fluids with extraordinary anti-wear power and extreme pressure are needed. Meets the requirements of DIN 51517 Part 3-CLP specification.

Finishing Mill Morgan No-Twist Mill Oil

HM CIRCULACION - 90 Oil specifically designed for circulating systems, especially those found in the steel industry (Morgoil, Mesta, Morgan rolling mills "No-Twist Mill", Danieli, Demag, etc.) or in the paper industry (dryer rolls, etc.) where the fluid used must ensure optimum characteristics of oxidation resistance at high temperatures (even under steam conditions) and corrosion protection. It is based on highly refined mineral oils blended with selected additives that provide excellent water demulsibility and foam control. It is inert to yellow metals and sealing materials.
HM CIRCULACION - 220 Oil specifically designed for circulating systems, especially those found in the steel industry (Morgoil, Mesta, Morgan rolling mills, Danieli, Demag, etc.) or in the paper industry (dryer rolls, etc.) where the fluid used must ensure optimum characteristics of oxidation resistance at high temperatures (even under steam conditions) and corrosion protection. It is based on highly refined mineral oils blended with selected additives that provide excellent water demulsibility and foam control. It is inert to yellow metals and sealing materials.

Oil for Morgoil Bearings

HM CIRCULACION - 220 Oil specifically designed for circulating systems, especially those found in the steel industry (Morgoil, Mesta, Morgan rolling mills, Danieli, Demag, etc.) or in the paper industry (dryer rolls, etc.) where the fluid used must ensure optimum characteristics of oxidation resistance at high temperatures (even under steam conditions) and corrosion protection. It is based on highly refined mineral oils blended with selected additives that provide excellent water demulsibility and foam control. It is inert to yellow metals and sealing materials.

Hydraulic Systems

VESTA HLP - 46 Hydraulic oil with excellent thermal stability, good anti-wear properties, quick air and water separation and highly resistant to oxidation, corrosion, rust and foaming. Ashless type hydraulic fluid with good filterability. Recommended for most hydraulic systems in all types of industries, forklifts, tippers and dump trucks, loaders, backhoe loaders, dumpers and shovels and specifically for the following brands: FIAT-ALLIS, FAI, BENATI, JCB, HANOMAG, AVELING-BARFORD, BENFRA, FAUN, FURUKAWA, AUSA, O&K, DAEWOO, HITACHI, SAMSUNG, GURIA, MERLO, AMMAN and HIAB-VALMAN operating under normal working conditions. Meets DIN 51524 Part 2-HLP, AFNOR NFE 48603 HM and ISO 6743/4 L-HM standards. Approvals: MANNESMANN REXROTH.
VESTA HLP - 68 Hydraulic oil with excellent thermal stability, good anti-wear properties, quick air and water separation and highly resistant to oxidation, corrosion, rust and foaming. Ashless type hydraulic fluid with good filterability. Recommended for most hydraulic systems in all types of industries, forklifts, tippers and dump trucks, loaders, backhoe loaders, dumpers and shovels and specifically for the following brands: FIAT-ALLIS, FAI, BENATI, JCB, HANOMAG, AVELING-BARFORD, BENFRA, FAUN, FURUKAWA, AUSA, O&K, DAEWOO, HITACHI, SAMSUNG, GURIA, MERLO, AMMAN and HIAB-VALMAN operating under normal working conditions. Meets DIN 51524 Part 2-HLP, AFNOR NFE 48603 HM and ISO 6743/4 L-HM standards. Approvals: MANNESMANN REXROTH.
GLYNKOL HFC - 46 Water-glycol type fluid, with a filtration grade according to ISO 4406 of 15/12 maximum. Highly suitable for power transmission systems where there might be a fire risk. The operating temperature must never exceed 60 °C since this would produce excessive water evaporation. It has good anti-wear and anti-corrosive properties. Complies with ISO 6743/4 L-HFC and the Fifth Luxemburg Report Part 3 and National Board.
RESFLUID HFDU - 46 Hydraulic fluid, formulated with synthetic and biodegradable based fluids. Due to its natural characteristics, it has higher resistance to fire than mineral oils, as well as outstanding anti-friction and anti-wear properties and high corrosion and oxidation resistance. It does not contain water, mineral oils, metals or halogens and is compatible with most of the elastomers used in the manufacture of joints. Contact with butyric and ethylpropylenic rubbers is not recommended. It is a fire resistant hydraulic fluid suitable for use in installations where there might be a fire risk.
RESFLUID HFDU Hydraulic fluid, formulated with synthetic and biodegradable based fluids. Due to its natural characteristics, it has higher resistance to fire than mineral oils, as well as outstanding anti-friction and anti-wear properties and high corrosion and oxidation resistance. It does not contain water, mineral oils, metals or halogens and is compatible with most of the elastomers used in the manufacture of joints. Contact with butyric and ethylpropylenic rubbers is not recommended. It is a fire resistant hydraulic fluid suitable for use in installations where there might be a fire risk.
RESFLUID HFDU SF Hydraulic fluid, formulated with synthetic and biodegradable based fluids. Due to its natural characteristics, it has higher resistance to fire than mineral oils, as well as outstanding anti-friction and anti-wear properties and high corrosion and oxidation resistance. It does not contain water, mineral oils, metals or halogens and is compatible with most of the elastomers used in the manufacture of joints. Contact with butyric and ethylpropylenic rubbers is not recommended. It is a fire resistant hydraulic fluid suitable for use in installations where there might be a fire risk. Fluid with a filtration grade according to ISO 4406 of 17/15/12 maximum.
VESTA TV - 46 Transmission fluid of high stability to degradation, excellent resistance to oxidation and corrosion. It prevents the formation of deposits, even at very high temperatures. Specially recommended for automatic transmissions that require a GM DEXRON-II D quality level but with a higher viscosity.

Auxiliar Equipment

CORALIA - 2 Synthetic lithium complex grease especially indicated for the lubrication of electrical motors and fans bearings, at low, medium and medium-high speeds working in a temperature range from -50 to +150ºC. Suitable for long life lubrication. High temperature stable, resistant to thermal oxidation. Paper industry application: HIGH TEMPERATURE BEARINGS (dry end rolls, motors and fans, Doctor). Cement and mining: special for centrifugal mills at high speeds and temperatures up to 180º C. Wind turbines: BEARING GENERATOR. Mini-hydro plants: ELECTRIC MOTORS and GENERATORS. Solar trackers: BEARING and GEARMOTOR (azimuthal rotation system by horizontal bearing and girth gear), ELECTRIC MOTOR and BEARING (by worm system); ELECTRIC MOTOR (spindle tilt controller). Described by SKF in its interactive program of selection of lubricants: LUBESELECT Classification according to DIN 51502: KPEHC 2N-40.
VERKOMAX R-1000 Calcium sulphonate grease specifically designed to lubricate all grease points in off-road, mining and agricultural machinery operating in very dusty environments or in contact with water. Its high dynamic viscosity creates a grease seal at the edges of the bushings that prevents abrasive particles from entering the mechanism, increasing its useful life especially in bronze bushings, more likely to suffer premature wear. Likewise, due to its resistance to salt water and its very high tenacity, it is especially indicated for lubricating plain and rolling contact bearings, guides, racks, floodgates and pitch wheels in maritime and port machinery, since its exceptionally high resistance to water flows allows it to stay at the lubrication point. May be applied by brush or by hand-operated grease pump. Classification according to DIN 51502: KPF 2N-20.
VERKOL 320 - I (G 1) Lithium complex grease specially suited for centralised systems of mechanisms subjected to very high temperatures and loads (steel industry and heavy industry in general). Operating temperature from -20 to 150°C with peaks up to 200ºC. Classification according to DIN 51502: K 1N-20.
ATLANTA - 1 This grease is a homogeneous and stabilised blend of fluids (highly refined mineral and synthetic base oils), a lithium complex thickener, and the most advanced additives, including a high level of MoS2, confering it high thermal stability (up to 160ºC). It also has other desirable characteristics such as good pumpability at low temperature, excellent shear stability and water resistance properties. This grease presents excellent properties against oxidation, corrosion and rust acting as a sealant to prevent the ingress of contaminants. It is the most adequate product for heavy-duty applications such as mining, quarrying and construction industries, where high loaded bearings working at slow and oscillatory speeds are commonly found. It is particularly useful in plain and anti-friction bearings and hydraulic demolition hammers, where the grease life can be increased up to 10 times. It has also been used in the paper industry where it provides excellent lubrication of felt roller bearings, wet-end bearings and press section bearings, as well, as general mill applications, sealing them to prevent contamination with water, dirt, etc. Cement and mining: particularly recommended for BEARINGS and DAMPERS in vertical mills. Classification according to DIN 51502: KPF 1P-10.
ASTURUS - 3 Lubricating grease for all types of bearings operating at low, medium or high temperature from -20ºC to 130°C. Very suitable grease for electric motor bearings whether mounted horizontally or vertically, bombs bearings, smooth bearings with medium and high speeds and general lubricating points at usual temperatures. Classification according to DIN 51502: K 3K-20.
VERKOL WG Semi-synthetic lubricant gel, transparent, shiny and very thready. This product is specially formulated for the lubrication of gearboxes, including worm gears, located in places with difficult access and / or where there could be leakage problems and excessive noise. Ideal for use in bridge cranes. Classification according to DIN 51502: GP 00G-10.
MOLYWHITE SUPER Light coloured paste made of polymers with a high solids content of extremely low friction coefficient. Agent tenacious and adherent assembly that provides a very good corrosion resistance even under severe vibration. Cement industry: special for difficult running. Its light colour provides better visualization of the evolution of gear when contrasted with the black colour of the running-in greases. Reduce temperatures in new or reconditioned gears with high roughness and/or imperfections.
MOLYBLACK It is a spray lubricant based on acrylic lacquer with a high content in micronized molybdenum disulphide. Specially recommended to lubricate slideways, slide fasteners, bearings, gears, chains, threads or valves, as mounting agent for axis bearings and similar applications in paper, cement, energy, textile, iron and steel industries. Provides excellent performance in drives particularly exposed to dirt avoiding the adherence of the dirt to the gear. Wind turbines: pretreatment of the PINION and GIRTH GEAR DRIVE in the orientation system. Solar trackers: PINION AND GIRTH GEAR DRIVE (azimuthal rotation system by horizontal bearing and girth gear).
VERKOFLUOR 862 High-performance synthetic lubricating grease based on perfluoropolyether (PFPE) fluids and thickened with polytetrafluoreoethylene (PTFE), suitable for all types of mechanisms under continuous duty operations within a wide temperature range (-35 to 250ºC). Particularly resistant to oxidation and chemical agents and compatible with all types of materials: glass, metal, elastomers, ceramics, etc., whose properties remain unaltered even under wide temperature ranges. Its physico-chemical and tribological properties make it and excellent and resistant grease for many industries: corrugated fibreboard, bakeries, chemistry, ceramic, automobile, electronics, aerospace, steel and paper, among others. Grease totally inert, except in the presence of chemical agents with high fluorine content, and innocuous, which makes it perfectly recommendable for applications with food contact. Complies with the requirements of NSF Nonfood Compounds Registration Program for lubricants with incidental food contact.

©2015. TriboWorld LLP.All rights reserved Powered by DzainLab